Archive for the ‘Hardware’ Category

Instructions of Hootoo IP Camera Setup and Software Firmware update

November 5, 2018

Recently more and more customers have purchased Hootoo IP camera. For some green hand, it requires more to set up this Hootoo IP camera. As a consequence, I prefer to post the Hootoo IP camera setup steps. Hope this will help you while receiving our products.

Step 1: Hardware Instruction.
1. Install the Wi-Fi antenna.
2. Plug the power adaptor into camera.
3. Plug the network cable into camera and router/switch.

Step 2: Software Installation.
Install the follow software:
1. IP Camera Tool: Open the CD, click “IPCamSetup.exe””Next””Next””Close”.
2. ActiveX: Click “Appinstall.exe””Next””Install””Finish”.
After this done, the icon “IP Camera Tool” will be displayed on desktop.

Step 3: Real-time Video Demonstration.
1. Login:
Double click “IP Camera Tool” icon on desktop, search the IP address, choose the one of your camera, double click to go to IE login interface.
Default username: admin
Password: no password.
2. Choose the language.
English, Chinese, Spanish, German, Portuguese, French, Italian, Korean optional.
3. Choose the work mode.
IE browser: choose ActiveX mode.
Safari, Firefox, Google browser: Server push mode.
Mobile phone: sign in mobile phone.
4. Sign in.
Click Sign In, then can get video on real-time.

No pictures problem with ActiveX Settings for IE Browser

If use IE browser to connect the camera for the 1st time, maybe there is no image displayed, and there will be a clue to install the ActiveX. In this case, please do the follow steps:
1. Close the firewall of your computer.
2. Change the ActiveX settings, “IE” browser > “Tool” > “Internet Options” > “Security”> “Custom Level” > “ActiveX control and Plug-ins”, all the ActiveX options set to be “Enable”:
In addition: you can also click “start” menu->”Internet Explorer”, choose “Internet attributes ” to enter, or via “Control Panel” ->”Internet Explorer”, enter to Security setting.
3. If there is still no image, please close your anti-virus software, and then try step 1 & 2 again.

Wireless Settings
1. Make sure the router is wireless router.
2. Make sure the Wi-Fi antenna installed.
3. Make sure whether there is encryption of the WLAN of router, if there is encryption, keep the key.
4. Login the camera, click “Network”>”Wireless Lan Settings”>”Scan”, please scan 2 times, then you will find the WLAN from the list, choose the one you use.
5. If there is no encryption, just click “Submit”, if there is encryption, please input the key, then click “Submit”.
6. Wait about 30 seconds, the camera will reboot, then unplug the network cable.

How to use DDNS
1. Login the camera:
Click “Network”>”DDNS Service Settings”.
2. Choose the DDNS, there are 2 options:
Manufacturers DDNS: This domain is provided by manufacturer.
Third Party DDNS: This domain is provided by the 3rd party, such as Dyndns, Oray, 3322 etc.
Third Party DDNS
If you use third party DDNS, please choose the server you use, such as “3322.org” or “dyndns.org” as below:
You have to register an account firstly, keep the user, password, host, then input it.
Note: Only one DDNS can be chosen, for example, if you use manufacturers DDNS, the 3rd one wont work, if use the 3rd DDNS, the manufacturers one wont work.
3. Change the cameras port.
The default port of camera is “80”, please change “80” to any other one you like, such as “81”, “100”, “8091” etc.
Click “OK”, the camera will reboot, wait about 30 seconds.
Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router.
4. Set Port Forwarding in the router.
This is the most important step. Set port forwarding in router refer to the IP of your camera correctly, then the DDNS will work. Because there are so many kinds of routers from all over the world, so its difficult to show a fix steps, but there are some samples of different routers port forwarding settings as below, just for reference:

TP-LINK:
(1) Login the router.
(2) Choose “Forwarding”, select “Virtual Servers”
(3) Click the Add New button, pop-up below:
Fill the service port (except 80), IP address of the camera, then click Save
The port and IP address should be the same as Camera.

BELKIN:
(1) Login the router.
(2) Choose “Firewall”, select “Virtual Servers”
(3) Input the port (except 80) and IP address, then click save.
Note: The port and IP address should be the same as Camera.

DLINK:
(1) Login the router.
(2) Choose “Advanced”, select “Virtual Servers”
(3) Input the port, IP address, Protocol, then click save.
Note: The “public port” & “private port” should be the same as cameras port, choose the protocol to be “both”.
After all these 4 steps done, then you can use the DDNS freely, check the DDNS status from the camera as below, and get the link of DDNS for internet view.
Step: “Login”>”System”>”Device Info”:

Thanks for your support and attention, for further operation details, please check the full version user manual of our IP Cameras!

Ideal Types of Carpentry Classes

October 22, 2018

Your personal fascination with carpentry or woodworking may just be for some simple DIY projects or a full-blown past-time. There are numerous means for an individual to enroll in carpentry classes to be able to enhance your own woodworking knowledge. If you are curious to sign up for a carpentry class, you may want to see whether there is 1 in your town. Carpentry classes inside a neighborhood are normally ran by experienced and expert carpenters who will show you how to generate plans as well as build complex projects.You can even enroll in carpentry classes in your local college and even hardware store. Hardware stores usually offer lessons on varnishing, sanding along with other fundamental elements of carpentry. Regarding academic institutions, the community colleges or any college having technological and fine arts classes offer no cost carpentry classes to encourage individuals to register to the classes.

If you are intending to expand your studies, you’ll be able to request for info from your regional university as many universities give a wide range of night carpentry classes or weekend classes if you are working on a full time schedule. These part time classes are actually appropriate for working people that happen to be keen on growing additional skills or even enhancing the actual carpenter’s knowledge which they will have acquired earlier as well as individuals who do not want to pursue a certificate or a degree. However, if you might prefer to obtain a certificate or degree, there are colleges and universities that provide a full time or part-time lessons for you to obtain your carpentry certificate or degree. Do not forget that these types of courses can take at the very least 2 to 4 years to achieve.

Whenever you are at hardware or crafts stores, check out the bulletin boards. At times you may possibly find professional and knowledgeable carpenters or craftsmen promote their own carpentry classes for novices or even intermediates. This option is acceptable for professionals with very busy schedules and who actually prefer tailored carpentry classes.

Be sure to evaluate the sought after end result before you sign up for any carpentry classes. If you’re planning to produce cabinets or build sophisticated furniture, you may not desire to sign up for the beginners course. It would be much better for you to register for advanced carpentry classes to be able to learn something new, as opposed to what you already know.

Don’t forget to put a budget aside. Taking on carpentry lessons might be costly especially if you are a novice simply because you will surely have to purchase special tools needed for the program. Depending upon the size of college or institution, some resources may be made accessible to you and the rest of the students. The most important factor is always to sign up with a reliable source as well as the best option for you.

Xbox 360 Don’t Do This When You Get The 3 Red Light Error

October 15, 2018

The Xbox 360 is one of the most popular gaming consoles available today. With its wide library of games and high quality graphics and games, you can be sure that you will have endless hours of enjoyment when you play with your Xbox 360.

However, you will see that there are quite a lot of websites today that claims to teach people how to repair the 3 red light error. This creates a negative impact on the Xbox 360 and will make a lot of people throw their Xbox 360 and replace it with another seventh generation gaming console.

Don’t Option Takes Too Long…

The first thing that you need to do is that you should not send your busted Xbox 360 to the Microsoft repair center in McAllen, Texas. Even if Microsoft is offering an extended warranty for all Xbox 360 with the 3 red light error, you will still need to spend money on shipping and handling. And, most of all, you will need to wait at least 6 weeks in order to enjoy it again.

So, how can you repair the three red light error on your Xbox 360? And, how can you do it without purchasing a repair guide that you know that you wouldn’t even understand?

Now You Need To Investigate A Little…

First of all, you have to get to the bottom of the problem on why the three red lights on the Xbox 360 occur. Basically, the three red lights mean general hardware failure. The general hardware failure will usually mean that the GPU and the CPU chips have burned out. The cause is overheating.

So, in order to prevent it from getting the three red light error, you will need to avoid getting the Xbox 360 from overheating. In most cases, people tend to place their Xbox on a display cabinet. This is because it looks nicer and a lot neater than operating the unit out in the open. But, putting the Xbox 360 on a display cabinet is what makes it overheat. Why?

Don’t Forget To Address The Heat Issue…

You need to remember that the Xbox 360 generates a lot of heat. So, if you operate it on an enclosed space, the heat will not dissipate as well as it should have when it is out in the open with wires dangling all over the place. So, the best thing that you can do to avoid overheating your Xbox 360 is by operating it out in the open where it is well-ventilated to keep your Xbox 360 cooled. For safe measure, you should try operating the Xbox 360 in an air-conditioned room.

Dust is also a cause for overheating. As time passes, dust can accumulate inside and outside of your Xbox 360. The dust can clog the air vents as well as the cooling systems of your Xbox 360, such as the cooling fans. The dust can make the cooling systems work inefficiently and in some cases, it can even make it stop working.

As you can see, the three red light error is caused by general hardware failure. In turn, the hardware failure is caused by overheating. By stopping the root of all problems, which is overheating, you will be able to stop your Xbox 360 from experiencing the three red light error.

All in all, preventing it from happening is better than repairing or getting it repaired.

Now you can be a confident expert on three red light error. OK, maybe not an expert. But you should have something to bring to the table next time you join a discussion on three red light error.

Fix Your PC and Improve Performance with System Mechanic Free

October 10, 2018

Iolo presents the latest free version of its popular PC performance-enhancing software suites, System Mechanic Free. Providing seven award-winning tools to help boost performance, stability, security and reliability, this free software is also exceptionally easy to use, and it takes care of all of the hard work for you. You don’t need to know a thing about the inner workings of your computer’s hardware or the technicalities of your operating system, and the learning curve is minimal.

Tune Up Your Registry

Your computer features a system registry, a vast database containing information about your operating system, hardware and all of your programs. It’s extremely complicated, leaving it open to a multitude of problems which can slow down your PC or cause random crashes. However, System Mechanic Free includes a registry tuner to get rid of invalid entries and optimize the entire database.

Boost Startup Performance

System Mechanic Free ships with a startup optimizer designed to reduce the time it takes to reach a workable desktop. It will prevent unused programs from starting up automatically and bogging down your system, and it will perform various other tweaks to your startup settings to supercharge your computer’s performance.

Repair Memory Leaks

Memory leaks are among the most common cause of those infamous blue-screen error messages found in Windows. They’re often a result of faulty hardware drivers or system files, but thanks to the provided RAM leak repair feature, such problems will largely become a thing of the past.

Improve Hard Disk Performance

Improving hard disk performance will reduce the time it takes to load up Windows as well as any programs, games or file-copy operations. System Mechanic Free includes everything you need to tweak the performance of your storage devices with nothing more than a couple of clicks. It will defragment your hard disk to ensure that all data is stored contiguously for faster access, and it will clean up any junk files, such as temporary files and obsolete content left over by previous Windows installations or programs which didn’t get uninstalled properly. The tools provided are much more powerful and feature-rich than those which are native to Windows, and they’re extremely easy to use, regardless of your level of experience.

Repair Internet Access

Many different problems can arise when you’re connecting to either a wired or wireless network, and they’re often frustrating and complicated to solve as well. System Mechanic Free includes an Internet repair utility to help you get back online quickly without having to delve into the complexities of networking.

Repair Program Links

Do you have invalid shortcuts on your desktop or start menu? Invalid program links can be very frustrating, particularly if you don’t know where the program that they’re supposed to link to is installed. Fortunately, this tune-up utility will be there to help you by automatically repairing any problematic links or shortcuts.

Iolo presents everything you need to get started with tuning up your PC, and you can find out more or download the program today from its website.

Advantages of Kitchen Granite Countertops

September 9, 2018

Since you are using such a superior product as granite, you should think about the right type of sink to go with your new kitchen granite countertop. You should definitely consider going with an undermount stainless steel sink, as opposed to an overmount sink that would be difficult to clean around.

In addition to getting the right kind of sink installed, it is also important to select the just the right faucet to go with the sink. A stainless steel faucet would go well with the looks of a rich kitchen granite countertop.

The next important area is upgrading your cabinet hardware. The handles and knobs should also be of high quality in order to provide good accent to the overall look of the kitchen. Even if you are not replacing the cabinetry having high quality hardware with make those cabinets and the whole kitchen stand out.

So in planning your kitchen remodeling, just remember that kitchen granite countertops will make a provide a world-class addition and increase the re-sale value of your home.

Different Grades of Replica Handbags

August 12, 2018

Grades of Replica Handbags.
A high quality replica is an exact imitation of the original authentic one. It looks much realer than the general counterfeit, even people cannot tell if it is a fake or not if without careful check. Due to its low price and practical usage, more and more people tend to buy a high quality replica instead of the original one. While, do you know how many different grades the replica have? Here I would share my knowledge based on my experience in the replica industry.

* Grade B/AB

It should be the poorest replica item. The only part that is similar to the original item is probably the logo. A Grade B/AB replica handbag features low price, and is mostly found on street markets, You can tell it is a counterfeit just by a casual glance. Materials used for a Grade B/AB replica handbag should be fabrics of lowest quality, accessories of lowest quality, hardware and handcraft of lowest quality as well.

* Grade A

It can be said that Grade A replicas are of medium quality, which are more elegant in texture and softer to the touch than Grade B/AB replicas. The leather used and the sewing techniques are just so-so, and the package is slightly more attractive than Grade B/AB replicas. The overall quality is all right, though wont be worn out after some times usage, the leather wont turn into the color of beeswax with time goes by like a genuine handbag does. Materials used for a Grade A replica handbag include: common fabrics, accessories using split leather, hardware of so-so quality and fair handcraft.

* Grade A+

Grade A+ replicas are also called Grade AA replicas, of better-than-average quality. The texture is fairly nice, so are the handcrafts and details. The entire handbag feels up-market. Materials used for a Grade A+ replica handbag include: solid fabrics, accessories using top layer leather whose color wont change with time, hardware of common quality.

* Grade AAA

Replica handbags belong to this grade are made of imported cow leather whose color will turn into the color of beeswax after used for some time or wet. They are sophisticatedly made: patterns and sizes need to be checked carefully, look almost like the original ones. Replica handbags of this grade are quite popular among the public because of their reasonable prices and good quality. Materials used include: top quality solid fabrics, accessories using imported leather and hardware.

* 1:1

Replica handbags belong to this grade are made of imported cow leather whose color will turn into the color of beeswax after used for some time or when wet. The patterns and sizes need to be checked carefully since they are sophisticatedly made and look as if they are original ones. Every handbag of this grade is strictly made, making sure they look the same with the genuine handbag. The major difference from a 1:1 replica handbag is in the handcrafts, which is sophisticated still. Every detail has been paid special attention to and the execution is even nicer than the original handbag (because most of the original ones are handmade, and replicas are done by machines, so there is no wonder). Due to the complicated craftwork required, replicas of this grade are not mass-produced, and thus their price is comparatively high. But I suggest you buy these replicas rather than the original. You see, it features so delicate craftmanship just like the authentic, even an expert in handbags can tell them apart. But 1:1 Items are very scarcity, people only can find it in some secret shop or online retailers, such as ExactHandbag.com

The highest level of replica handbags enjoys the advantages of reasonable price, elegant in texture, exquisite workmanship and high cost performance, and thus is the best choice for those who cant afford the genuine but long for genuine quality.

How to Treat Data and File Failures

August 3, 2018

Data recovery is referred to as a process of retrieving data from a damaged or corrupted file. Data are recovered from hard disk drives, RAID, storage tapes, CDs and DVDs. File data recovery is often required when the software is physically damaged or when the file system is logically damaged.

Restoration results to proper accumulation of the files by the host operating system. Before this happens though, it is proper to take a look at the different scenarios that need backup or recovery. This allows end users to appreciate this concept. Issues involving data recovery

Data recovery services solve a lot of issues. Each of these issues needs a different treatment. In this regard, find out more about the problems solved by data recovery and what can be done to treat the situation.

Operating system failure. This is the most common issue that requires data recovery. This typically happens in a single-disk or single partition systems and single OS. The main objective to treat this scenario is to have a file data recovery system in order to copy all files needed to a disk. Often, a live CD is used in the process. As the data are transferred to a disk, file organization happens as well. Organizing files may extend to the use of multiple CDs in the process.

Disk-level failure. This is a problem that involves hard disk failure, disk partitioning and file systems. The problem starts when data are no longer readable. Solving these file problems depend on the case. Usual solutions are made either through repairing the file system or by making use of the so-called partition table. Hard disk recovery techniques with the use of data recovery software or hardware replacement may also be employed.

File retrieval failure. This involves files accidentally deleted from a storage media or device. This involves complicated processes – often a combination of what is done in the first two scenarios.

These are major cases that data recovery solves. It is therefore important to learn about all the basics of this process in order to apply the right solution to a scenario. A lot of facts are gathered through the aid of information technology websites and those that offer data recovery software.

Property of RecoverMyPc Inc. For more information please visit www.recovermypc.com

Creating an inexpensive photography studio

July 29, 2018

Lets face it: the thought of taking an existing space and converting it into a studio can be daunting to say the least! As a newborn photographer, a studio is an absolute necessity. But creating the studio without spending a fortune (Im talking gagillions of dollars heregagillions) led me on a path that had very little instruction, so I had to blaze my own trail, getting creative along the way!

A LITTLE BACKGROUND

Hi! Im Elizabeth. Owner of Elizabeth Moore Photography based out of Lancaster, Pennsylvania. I married my wonderful husband last year and had to uproot, re-locate, and re-brand my business. As many of you photographers who have gone through this know, this can be a business killer!

THE STUDIO

Moving to a new area outside of my old reach was tough. Id be lying if I said it was a smooth transition. However, one amazing moment led to another once I started working on converting a spare bedroom into my studio. As a newly married couple, money was tight, so everything purchased had to go a LONG way.

The spare room started as a pretty standard 10 x 12 white walls, two windows, and carpet (which led to a problem, more on the carpet later). My studio had to have different flooring choices, numerous backdrops that were able to be quickly and easily changed out, and the studio had to be able to accommodate a lighting system. How the HECK am I going to do all of this in 120 sq. feet!?

Cue my husband, who has an engineer brain, who figured out inexpensive work-around tactics that actually work BETTER than the expensive stuff!

LIGHTING

This will probably be the most expensive single purchase in your studio. I knew I needed at least three lights: an overhead, and two fill lights on 45-degree angles. There are a million options out there for this kind of “kit”, but I have tried and tested about a half dozen of them until I found the one that blended quality with value the best: The CowboyStudio 2275 Watt lighting kit.

studio-on-a-budget-02

If youre looking for a lighting kit that that can be transported all over Gods creation, then this kit is probably NOT for you (I havent had any issues in my studio, but the kit may not survive being moved around constantly), but for a permanent starting studio these are just good enough! The option to turn on each individual bulb on the fill lights is awesome, and gives you customizable light for your situation!

Heres my two hacks:

For the overhead light, you need counter-weight to go in the bags. I use 4 cans of the on-sale soup from the grocery storecheap and heavy.
Go purchase fluorescent bulbs with color temperatures between 3500-5000k for that natural “soft daylight” look. The 5500k bulbs the kit comes with put out too sterile of light for me, but everyone is different!
Lets break down the lighting cost:

Lighting Kit $230.00
Soup Cans Counterweights 4 for $1.00
Replacement bulbs 10 @ $8.00 a piece.
Total: About $310.00
BACKDROP SYSTEM

I specialize in photographing newborns, toddlers, and older children. Because of this, I have extremely limited time to be changing out backdrops and need to be able to do it quickly and easily. Luckily, theres an inexpensive solution for this, also from Cowboy Studio: Three-roller wall mounting backdrop support system.

Side note: Fotodiox also has an almost exact system, which you can find on Amazon. However, I cant speak for its quality, as I havent used it!

The little plastic chains are surprisingly easy to use, and work pretty well, even with heavy backdrops! Also, DO NOT forget to use large wall anchor screws to mount the backdrop system. No one needs embarrassment with a client, or worse: a lawsuit, because of a mounting system that pulls out of the drywall and falls.

Simply mount the two ends of the wall mount system a little farther distance apart as your largest backdrops width. If your largest backdrop is 6 feet wide, set the distance between mounts to be 6.5 feet apart. If you might be expanding to larger backdrops later on, make sure to keep that in mind when you mount the system, as its FAR easier to easier to accommodate smaller backdrops than larger ones in the future.

BACKDROP SUPPORT

Speaking of the backdrop system, you also need to figure out how to hang your backdrops! This is where the crafty part comes in! The manual for the mounting system suggests using PVC or aluminum tubes as the cross bars to support the weight. I HIGHLY recommend PVC tubes. Luckily, I did the trial-and-error already, so you dont have to!

PVC dimensions: 2″ diameter Charlotte Pipe from any hardware store . Usually these come in 10ft. long segments, which you will need a handsaw or power tool to cut to the proper length. If you can find a store that will charge you by the foot, you will save some money. I had to buy one pipe for each backdrop, since my cut size was 6 feet in length (which meant 4 of pipe was discarded).

How to mount the backdrops you ask? Simple! I used carpet tape from any hardware store. Both sides of the tape are sticky, with powerful adhesive, so you can hang anything from heavy vinyl to light paper backdrops without worrying about it peeling off. I found that using two strips of the carpet tape next to each other gives the best hold.

BACKDROPS

With this set-up, you can literally use anything as a backdrop. Wallpaper, construction paper, fabric, vinyl, muslin, and even carpet! You can find rolls of paper at local craft stores (great for seamless wall to floor backdrops). I just rolled the paper off the cardboard tube it comes with and onto the PVC tube! Also, vinyl is actually much cheaper in craft stores than it is online.

We ran into a snag while using the paper and fabric backdrops. How can you keep the material weighted down to prevent curling or wrinkling of the material? The answer came with steel rods! You can pick up these at hardware storesjust find the proper weight and length to match your material. Fold up the bottom couple inches of whatever material youre using, use carpet tape to adhere it and create a “pocket” for the rod to slide in, and BOOM youre done. You now have a weighted bottom to your backdrop to ensure little/no wrinkling, no curling, and a smooth roll-up and roll-down of the material!

Lets break down the backdrop system cost:

Mounting System $60.00
Wall Anchors & Screws $5.00
PVC supports $7.00 each
Carpet tape roll $9.00 each
Backdrops Varying costs (Vinyl was $20.00 for 2 yards each with coupon)
Total: $100 + depending on amount of backdrops
FLOORING

Originally, I thought that this part of the studio project would be the most expensive. My old studio had beautiful wood floors, which were awesome for shoots. Unfortunately, my new space had carpet, and I mean bottom-of-the-barrel-cheap type of stuff. I thought I was going to have to purchase wood flooring and put it together piece-by-piece, but luckily my hubby found an amazing solution!

Remember vinyl flooring? That stuff that a few years ago looked so unbelievably hideous, and you would probably only use it for a mudroom or for the flooring of a camping trailer? Well, what used to be ugly has done some growing up! Vinyl nowadays comes in such a variety that you can find exactly what you want, even wood floor imitatorsand it actually looks like REAL wood!

My husband went to the local discount flooring warehouse and snatched up some clearance items that had already been cut down from the full-size. Because of this, I was able to get 4 different 6 foot wide sheets of “wood” vinyl for less than 100 bucks! After cutting the sheets of vinyl to size, I actually had enough leftover to make a few backdrops too, one of which is long enough to be a seamless backdrop.

One problem with carpet underneath: when someone steps on the vinyl, the carpet pushes down, which gives a “sunken” look up on top. Solution: Plywood squares! We found these great connecting squares of plywood that have traction bottoms. You can buy just enough to fit the size of your space, and theyre cheap!

With this set-up, I can quickly and easily interchange flooring options for all of my clients. They can request one or two different flooring choices, and I just have those two options laying on top of each other!

Lets break down the flooring Cost:

4 discount vinyl floors $95.00
22 Plywood connecting flooring squares 9 @ $6.00 each (makes 66 foot square)
Total: $150 with four flooring options
BONUS: Baseboard Molding Hack:
My shooting style includes a bit of seamless backdrops and also ones with flooring/backdrop combos. I wanted baseboard moldings to imitate a real wall. Obviously, you have to fake this with no actual wall since youre using a hanging backdrop.

The solution was prettyinteresting. But it was definitely a cool fix! Once you buy your baseboards and cut them to length, youll need to attach an L-bracket to each end of the baseboard with superglue (for maximum hold). The baseboard will want to tip forward at this point because of the top heaviness. To fix this you need to add counter-weights. My husbands ingenious cheap solution:

Steel nuts! You can buy these for virtually nothing at any hardware store. Just superglue and stack them as high as you need to counter the weight of the baseboard. Once youre done, you should have a freestanding baseboard that can just push up against the backdrop, imitating a real wall!

lets break the Baseboard Cost (though this is not mandatory and is definitely my style):

2 baseboards $20.00
Bag of L-brackets $5.00
Bag of 25 Nuts $5.00
Total: $30.00
PROPS

As a photographer who specializes in newborns and children, Ive accumulated ROOMS of props. Yes, Im using rooms as a unit of measurement!

You can spend a fortune on buying props specifically made for photographers. Or, you can save a fortune by visiting local garage sales, antique outlets, and flea markets. For example, I found this absolutely stunning used saddle for about 10 bucks at an antique flea market. It took about 20 minutes (and a whole roll of paper towels) to clean it up, but it was totally worth it!

Also, many newborn photographers will splurge on a legitimate baby poser beanbags. These are specifically designed to help bring the best out of your shots! I recently purchased one of these myself as my business has grown, but did you know you can accomplish almost the same thing for a fraction of the cost?

Meet the Wal-Mart beanbag. For those of you outside of the US, Wal-Mart is this magical place where you can find any product you can imagine, for cheap. This includes beanbag furniture, where you can pick up a small beanbag chair for less than 20 bucks.

When the beanbag arrives, you will need to add more “fluff”, so I bought an extra bag of beans, which gave me the perfect firmness I needed! A couple of microphone stands I picked up at a flea market, a curtain rod between the two, and some clamps will attach your blankets/cloth so you can drape it over the bag. DONE. You have a perfect newborn poser with a simple, easy, and cheap backdrop system.

Lets look at the props costs:

Props Cost $50.00
Beanbag poser $18.00
Extra “beans” $16.00
Mic stands $20.00
Curtain rod $10.00
Blankets/cloth $20.00
Total: $134.00
ITS A WRAP

I hope after reading this, youve gotten ideas as to how its possible to have your very own studio. You CAN do it yourself, and you accomplish it without breaking the bank! Of course, everyones situation is differentmaybe you need to add more in the budget for additional backdrops, or perhaps you already have a lighting kit. Either way, the total budget for this project will change for you and my estimates should be used as guidance, not rule.

Here is breakdown of the entire studio cost:

Lighting $310.00
Backdrops (system, supports, materials) $100.00 +
Flooring $150.00
Baseboards $30.00
Total: ~$600.00 (more depending on the amount of backdrops you have)
And for the newborn photographer:

Studio: $600.00+
Props/posers/blankets $134.00
Total: $734.00+
With just a few booked sessions, I have already paid for my new studio with all the props I need. The best part? I can actually call this space “mine”, and know that my own sweat, hard-work, and determination helped create my very own photography studio complete with everything I need for even the messiest situations.

Best of luck to you!

Fewer Security Precautions Make Small Businesses A Prime Target For Hackers

July 17, 2018

A primary role of any small to medium sized business leader is to manage costs and cut back where possible, especially in tough economic times. In doing so it is important that these efforts do not compromise the ability to secure information, minimize liabilities and ultimately make money.

Many small business managers believe they are less likely to be a target in a malicious attack because their company is small, but this is simply untrue. Hackers prey on small and medium sized businesses because they generally take fewer security precautions than their larger counterparts making them more vulnerable to these types of attacks.

Smaller businesses are generally more entrepreneurial and less emphasis is placed on rigid policy and procedure; therefore, a laid-back approach to best practices is often adopted as a result. The simplest precautions to implement are also the easiest to overlook and this is cause for trouble.

The bullet points below provide a quick and easy checklist to help reaffirm your commitment to security.

Training and education: Make sure that all employees understand the importance of the matter so that no one is a weak link in the system.

Access procedures: It may be convenient and productive for employees to log in extra hours and work on company files at home but keep in mind that anything brought in from outside is an instant threat. One infected file can contaminate an entire network. Formulate a plan to address this. Consider a company policy that forbids this practice or even disable USB ports. It is possible to disable only the flash drive portion of the USB so that they still are compatible with other functional hardware such as keyboards and mice.

Review permission: Employees should have access only to the parts of the system they need to complete their job function. It is particularly easy to overlook default settings when initiating a new user. Also, schedule this review periodically as job functions and needs change over time.

Change passwords regularly: Periodic changes to passwords are sometimes required but if not, employees are reluctant to update them. It is difficult to remember new passwords, after all a person can only have one birthday, birth city and first pet but this is an integral part of an overall strategy for information security at every level including servers, systems etc.

Research cloud computing solutions: Make sure that the vendors you partner with take security as seriously as you do. Research each vendor especially those who store or manage secure information for your company.

Install and update virus software: As much as we all know about the importance of virus protection delaying updates and not registering pre installed software are common occurrences. Don’t make this mistake. A quick email reminder to all employees is a great way to keep this topic top of mind among your team.

Hardware and Software requirements for VoIP

July 13, 2018

Voice over Internet telephony has changed the way we communicate. The innovative, flexible and scalable solutions have engineered a revolution of sorts in the present day world. The concept of virtual area codes can be mentioned in this context. VoIP users can opt for this service and select an area that is distinctly different from where they live. They can then enjoy facilities such as unlimited long distance calls to friends and family members living in that area code. This way, they are able to save money while connecting at different levels with the people who matter. This is another area wherein the VoIP solutions have scored over the traditional phone services.

Businesses can also make the most of this high-end technology and use it to their advantage. They can, for instance, think about enhancing their scope and areas of operation, by floating local numbers in potential markets. It is quite evident that they would be getting more leads due to the low costs of local calls. When the number to be called is a local one, more people from target market segments are expected to call in.

The point is that the VoIP market is more than ready for the best of products and services. The only thing is that certain conditions need to be met for the successful implementation of this innovative technology. For instance, a computer with a high speed Internet access is a must-have. The computer should be updated with audio and video codes. This ensures that the persons using the VoIP products and services are not disappointed with the quality of the audio as well as graphics. Another pre-requisite is that the digital video compression format should also be present in the computer that is being used.

Moreover, another important requirement is the telephone adapter, which is often delivered by the voice over IP service providers, as an integral part of VoIP packages. As a matter of fact, this VoIP hardware is indispensable for converting the household phone into one that can be used for making Internet enabled calls. Most important, the hardware and software of VoIP that are needed for the successful running of IP solutions have to be implemented properly through a proper procedure of software installation and hardware activation.

Quite a few service providers are currently present in the market which can help end users to get initiated. As a matter of fact, due to the many choices that are available, it often becomes difficult for potential users to zero in on particular service providers. In this context, a VoIP requirements list becomes indispensable. It is preferable that potential users should go for VoIP wholesalers or resellers that have established themselves well in this domain. The quality of services also becomes important in this context.

It is quite natural that potential users would want to get the most for the money that they spend. So, it is quite evident that they would check out the features and costs of the VoIP solutions and services on offer. They would then be able to match the same with their requirements and select solutions that best satisfy their needs. Certain parameters that need special attention include the financial stability of the company, the technical support that the company offers, and last but most important, the overall voice quality.